This is a 12 1/2 inch tanto point knife made for Marcus Luttrell. The blade is 440c and 6 1/2 inches long, made by Texas knife maker Zane Blackwell. The handle is made of Sambar antler donated by Marcus. Overall length 12 1/2 inches.

This is a 14 inch Texas Bowie knife. The blade is made of 440 C Stainless steel, 9 1/2 inches long with handle made of elk and stabilized dyed maple wood.

3 1/2 inch 440 C stainless steel blade with brown canvas micarta barbed wire pattern.

This is a 2 3/4" stainless steel folder knife with handle bade of axis antler and stabilized spalted maple wood.

This is a 3" 6A stainless steel gut hook blade, 5/32" thick. The handle is made of Axis antler, leather, and water buffalo.

The blade is 8-1/4” overall in length, with a 3-5/8” long blade, 1-1/16” wide and 5/32” thick. It is made of 6A high carbon stainless steel, this blade is hollow ground and highly polished. It is cryogenically treated to enhance its edge holding properties. The handle is made of stabilized black ash burl wood.

This is a 3 1/2 inch Brusletto stainless steel blade with white tail antler and leather handle.

The blade is 7-5/8” overall length, 3” long blade, 1-1/4” wide and 5/32” thick. Very slight upswept point makes this blade especially good for skinning. It is highly polished 6A high carbon stainless steel and cryogenically treated to enhance its edge holding properties. The handle is made of stabilized dyed box elder burl.

This is a 9-1/8” overall length, 4-1/2” long blade, 1-3/16” wide, 5/32” thick, mirror polished 6A high carbon stainless steel. This blade has been cryogenically treated to enhance its edge holding properties. The handle is axis antler, stabilized box elder wood, and leather. The handle is 5" long with an average 1" diameter.

The overall length is 9-5/8”, the blade face is 2-3/4”, 3/16” thick. Made from 440 grade stainless, cryogenically treated, hardness is 56-58 RC. The handle is made of stabilized spalted maple wood.

This is a cryogenically treated 440C stainless steel 4-1/2" overall length, 2" long blade which is satin finished and hollow ground, 1" width, 1/8" thick. The handle is stabilized spalted maple wood.

This is a 2 3/4 inch 440 stainless steel folder knife. The handle is axis antler and stabilized amboyna wood.

This is a cryogenically treated 440C blade. 6-1/8” overall length and 1/8” thick with 2-1/2” blade with top serrations. The handle is stabilized black ash burl wood.

The blade is 7-5/8” overall length, 3” long blade, 1-1/4” wide and 5/32” thick. Very slight upswept point makes this blade especially good for skinning. Highly polished 6A high carbon stainless steel, cryogenically treated to enhance its edge holding properties. The handle is made of stabilized maple burl.

This is a 3 1/2 inch black blade with a white tail antler handle.

The blade specifications are overall length 9.75" and the blade length is 5.0". The blade is made from high grade AUS8 stainless steel. The hardness is at 57-59 rc. The bolsters on this model are 416 stainless steel. The handle is stabilized fiddle back maple.

This is a 3 1/2 inch Brusletto stainless steel blade with white tail brow tine and leather handle.

This is a 3 1/2 inch Brusletto stainless steel blade with white tail antler and leather handle.

This a 4 inch stainless steel blade with a white tail antler and leather handle. This knife features the brow tine finger trigger.

This is a Damascus blade forged out of 1075 and 15n20 hi-carbon steel. It is heat treated, etched and polished with a white tail antler and leather inlay handle.

This is a 3 1/2 inch carbon steel blade with a white tail antler and leather inlay handle.

This is a 5 inch 6A stainless steel hollow grind satin finish blade with a University of Texas concho on crown of antler. The handle is made of white tail antler and black palm hard wood and leather inlay. and

This a 3 1/2 inch Brusletto stainless steel blade with white tail antler and leather handle

This is a 5 inch damascus blade with bacote wood and white tail antler handle with a brow tine trigger piece.

This is a 5 inch 6A stainless steel hollow grind satin finish blade with Texas A and M concho on crown of antler.